Load Tray 2 or an optional 500-sheet tray
| CAUTION:
|
To avoid jams, do not load trays while the product is printing.
|
|
| CAUTION:
|
Do not fan the paper. Fanning can cause misfeeds.
|
| 1.
|
| Pull the tray out and lift up slightly to remove it from the product.
|
|
| 2.
|
| Pinch the release lever that is located on the left guide and slide the side guides to the correct paper size.
|
|
| 3.
|
| Pinch the release lever that is located on the rear paper guide and slide it to the correct paper size.
|
|
| 4.
|
| Load the paper into the tray. Make sure that the stack is flat at all four corners and that the top of the stack is below the maximum-height indicators.
|
|
| 5.
|
| Slide the tray completely into the product.
|
|
HP LaserJet 600 M601 M602 M603 Load Tray 2 or an optional 500-sheet tray